How often is a question about people
The right cleaning schedule has less to do with square footage than with how many people pass through each room and what they do there. A restroom used by a full floor of staff soils in hours. A records room may go a week without a footprint. Cleaning both on the same cadence either wastes visits or leaves the busy room behind.
This chart sorts the parts of a typical Antioch or Pittsburg commercial building by how quickly they need attention again. It does not list the individual tasks; our scope of work guide covers what gets done in each room. Use this page to decide how often each area comes up on the schedule.
Finding your column
Each chart has three columns. Quiet use fits a small office, a professional suite with appointments spread through the day, or a building that is closed on weekends. Steady use fits a typical office floor, a clinic, a coworking space or a store with regular foot traffic. Busy use fits a building with a public lobby, more than one shift, a school or a store that fills on weekends.
Few buildings sit entirely in one column. A quiet office can have a busy front entry, and a warehouse may have a light front office alongside a breakroom used by every shift. Pick a column for each area, not one for the whole building.
Chart one: the recurring visit
Start with the rooms the crew sees on its regular rounds. In this chart, “each visit” stands for every scheduled service, whether your building books three nights a week or five, and the busier columns add daytime help on top. Read down your column for each area and note the cadence beside it on your floor plan.
| Area of the building | Quiet use | Steady use | Busy use |
|---|---|---|---|
| Restrooms | Each visit | Nightly, with a midday check | Nightly plus porter rounds through the day |
| Lobby and front entry | Each visit | Nightly | Nightly plus daytime touch-ups |
| Breakroom or kitchenette | Each visit | Nightly | Nightly plus a lunchtime reset |
| Desks and workstations | Weekly dusting | Two or three times a week | Nightly wipe of cleared surfaces |
| Meeting and conference rooms | Weekly | Each visit | Nightly, tables and chairs reset |
| Interior glass and door handles | Weekly | Each visit | Nightly, plus daytime wipes |
| Waste and recycling bins | Each visit | Every night | Every night, plus daytime pulls |
Chart two: floors, carpet and high work
The second chart covers periodic work booked on top of recurring cleaning. These treatments are what keep floors, carpet and overhead surfaces from slowly falling behind, and their intervals are measured in weeks and months rather than nights.
| Periodic work | Quiet use | Steady use | Busy use |
|---|---|---|---|
| Hard floor burnishing | Monthly | Every two weeks | Weekly |
| Scrub and recoat of tile | Yearly, or twice a year | Every three months | Six times a year |
| Carpet extraction, main areas | Once a year | Twice a year | Quarterly |
| Carpet at entries and lanes | Twice a year | Quarterly | Monthly |
| High dusting: vents, ledges, fixtures | Twice a year | Quarterly | Monthly |
| Exterior windows | Twice a year | Quarterly | Monthly at the storefront |
Adjusting the chart to your building
Move an area one column to the right when its use goes up: a new tenant, a second shift, a busy season or rainy weeks when mud comes in on every shoe. Move it left when a suite empties or a team goes hybrid. Weather matters in the Delta, too; dry, windy stretches push dust onto ledges and glass faster, and wet months put grit on entry floors and carpet.
Some areas jump straight to the busy column because of who uses them. Childcare rooms, medical waiting areas and fitness floors earn more frequent attention on touch points and floors even in a modest building, and breakrooms shared by a large crew need it whatever the building type.
When daytime attention makes sense
Where the chart lists daytime touch-ups, midday checks or lunchtime resets, a day porter is usually the answer. A porter covers restrooms, spills, lobby glass and trash pulls while the building is open, and the main cleaning still happens after hours.
Apartment communities follow the same logic, with mail rooms, lobbies and fitness rooms on the shortest intervals. Our apartment common area plan walks through those spaces in detail.
Turning the chart into a schedule
Once each area has a column, the schedule nearly writes itself. The recurring areas decide the number of service nights in a week, and periodic work is spread across the calendar so floors, carpet and high dusting do not all land in the same month. Our janitorial services follow that plan, with floor care, carpet cleaning and window cleaning booked on their own cycles.
Bring your marked-up chart to a free walkthrough. We will confirm the columns room by room, set the visit days and send a written quote built around the frequencies you chose.
A few useful answers
Common questions
How often should an office restroom be cleaned?
On every service visit at minimum. Buildings with steady or heavy traffic add a daytime check or porter rounds so restrooms stay stocked and presentable between nightly cleanings.
Do all rooms need cleaning every night?
No. Restrooms, entries, breakrooms and trash come up on every visit, while quiet offices, storage rooms and lightly used meeting rooms can move to a weekly or twice-weekly cadence.
How often should carpet in a commercial building be deep cleaned?
Use the carpet rows in chart two: entries and lanes sit one column busier than the main carpet, and the column you pick sets the interval.
Can the frequency change after cleaning starts?
Yes. Areas move between columns when use changes, and we adjust the schedule and the quote to match.
Is this chart the same as a cleaning checklist?
No. A checklist lists the tasks done in each room. This chart sets how often each area comes up, and the two work together in a cleaning plan.
Resources

