Printable checklist
Where this guide picks up
Our switching guide covers ending the old arrangement: notice, collecting keys from the outgoing provider and counting the supply closet. This one starts after that, on the day a new company takes on the building, and runs through the first month, when the schedule either settles into the building or keeps missing.
The month splits into five stages: the walkthrough, the access handoff, confirming the scope, checking the first week, and the review at day 30. Each stage has a short list in the printable tracker on this page.
Days 1 to 3: the walkthrough
The first job is a walkthrough with the person who will own the account on your side. It checks the room list from the quote against the building as it stands today and records anything that changed after the bid went out.
Bring whoever knows the building’s quirks: the office manager who hears the complaints, or the facilities lead who knows which door sticks. Half an hour together now saves a string of notes later, because the crew starts with the details a quote never captures.
- Walk every room on the checklist, plus storage and the janitor closet
- Mark rooms that stay locked, are off limits or need different handling
- Show where supplies are kept and where trash and recycling go out
- Point out floors and carpet that will need attention soon
- Swap contact names and phone numbers on both sides
Keys, alarm and access
Access gets set up before the first visit, not during it. A crew standing at a locked door at night is a lost visit, and a code that nobody wrote down becomes a problem at the next change.
- Keys, fobs or cards issued to the company and logged by number
- A separate alarm user code for the cleaning crew, with arm and disarm steps written down
- The entry door, parking and lock-up routine agreed
- Who to call when a door will not lock or the alarm trips
After the first night, ask for a short note confirming the building was locked and armed as agreed. It takes a minute and removes a guess from the morning.
Confirming the scope
Before the first visit, read the checklist once more with fresh eyes. Every room should appear, every task should carry a frequency, and the periodic work, such as carpet extraction, floor scrubbing and recoating, and window cleaning, should have a month attached. Correcting a line now is far easier than after three weeks of visits.
If the building’s hours or headcount have changed since the quote, say so here. The frequency for each room follows how it is used, so a new shift or an extra kitchen changes the plan.
Week one checks
Walk the building the morning after each of the first two or three visits. You are not hunting for perfection; you are checking whether the checklist fits the building.
Go early, before staff arrive, so you see the rooms exactly as the crew left them. Bring the printed tracker and mark each line as you pass through the building.
- Restrooms clean and restocked when the first staff arrive
- Trash and recycling out of every bin on the list
- Breakroom counters, sink and tables done
- Front door glass and the reception desk presentable for the first visitor
- Off-limits rooms left alone, and papers on desks untouched
- Doors locked and the alarm set
Weeks 2 and 3: the feedback loop
Feedback lands better in writing and in one place. Send comments to the named contact, keep each one specific (which room, which task, which night), and ask for the checklist itself to change when a miss repeats. A note that fixes one visit helps once; a checklist change fixes every visit after it.
Our supervisors carry out quality inspections during this stretch, and their findings and yours should point at the same lines. Where daytime traffic outpaces the nightly list, this is a sensible time to try a few hours of day porter service.
Day 30: the review
At the end of the first month, sit down with the cleaning company and the checklist. Go room by room and decide what stays, what moves to a more or less frequent column, and which periodic work goes on the calendar for the next quarter.
- Repeat misses resolved, or a checklist change agreed
- Frequencies adjusted for rooms that need more or less
- Periodic floor care and carpet work given dates
- Supply levels and dispenser fit checked
- The next review date set
After that, review the checklist whenever the building changes: a new tenant, a renovation or a shift that starts earlier. Our Antioch janitorial services start every new building on this sequence, and you can reach us at (925) 528-0380 to plan your first month.
A few useful answers
Common questions
How can I tell whether week one with our new cleaners went well?
Walk the building the morning after each of the first two or three visits with the printed tracker. If every room matches its checklist lines, week one went well; any line that misses twice goes back as a checklist change.
How do I give feedback to a new cleaning company?
In writing, to one named contact, naming the room, the task and the night. Ask for a checklist change when the same miss comes back.
What is a 30-day review?
A sit-down at the end of the first month to go through the checklist room by room, adjust frequencies and date the periodic floor and carpet work.
Should the cleaning crew have its own alarm code?
Yes. A separate user code, with keys and fobs logged by number, lets you track access and change it later without touching anyone else’s code.
Is the 30-day tracker free to download?
Yes. It is a plain PDF on this page, ready to print and file with your cleaning paperwork.
Resources

